Penstock / Sluice gate is constructed from stainless steel sheet metal bending and MIG welded to give the required rigidity for the design sealing duty.
The equipment used to control the flew or liquid consisting a sliding door. It is controlled by mechanically operated spindles, moving vertically over the aperture in a frame which is secured on to a structure.
Penstock can be designed duties. For odd aperture size from 150mm up to 3000mm and can be custom made. The design is suitable for square, rectangular or round applications. Small (less than 900sq), medium (900sq to 1400sq) and large (over 1400sq)
|Frame, Side Frame and Slide Plate (Metal Door)||Stainless Steel (Gr 304L or 316L or Duplex)|
|Operating Nut||Gunmetal (BS1400 LG2)|
|Sealing and Pressure Adjusters Door Plate (Plastic Doors)||UHMWPE (UV Stabilized)|
|Flush Invert Seal||EPDM Rubber (ASTM 2000)|
|Fasteners and Adjusters||Stainless Steel (Gr A2 or A4)|
|Spindle||Stainless Steel (Gr 304L or 316L or Duplex)|
|Seal Retainer||Stainless Steel (Gr 304L or 316L or Duplex)|
|Slice Guide||UHMWPE (UV Stabilized)|